크러셔 해머에 대한 포괄적인 가이드

Crusher hammers by Kilomega also known as hammers are critical wearing parts in the crushing equipment. The major function of these equipment is to reduce raw materials such as limestone, coal, and granite into smaller sizes. Choosing the proper hammer for the 파쇄기 is not only important for improving the efficiency of work and the longevity of the tool, but also both can be considered as out of one cloth. So, in this guide we’re describing types of crusher hammers and how they are used, and also the main rules of.

Crusher Hammers Types and Applications and Maintenance

Following are descriptions of crushing hammers and how they work, as well as important pointers to consider.

1. Types of Crusher Hammers

1.1 Action high manganese steel hammers

High manganese steel hammers is significant in its feature of intensity and wear resistance.

- Applications: Applied in impact 채석장 분쇄기 with medium hardness of the materials such as coal.

-특징 :

- Work-hardening property

Broad; it fully complies with the broad nature of its endurance to impact.

1.2 High Chromium Hammers

High chromium hammers are suitable for those sectors which require high resistance in terms of wear and tear during service.

- Applications: Suitable for an abrasive and robust class of materials such as granites and quizzed among others.

-특징 :

- 우수한 내마모성

A higher degree of service life with a concurrent reduction in the impact toughness effects.

1.3 Composite Hammers

Various materials are integrated into ceramic matrix hammers to form the wear resistant and impact tolerant.

- Applications: Used in severe service where both wedging and impact kind of loading prevail.

-특징 :

Flexible Used Lands in Different Methods

- Enhanced lifespan

2. Uses of Crusher Hammer

Crusher Hammers Are Widely Used in Industries Such As:

Mining: Crushing ores and minerals

Cement Plants: Reducing limestone in order to make clinker

Quarries: Applied in stone and aggregate industries for construction purposes

Coal Industry: Exchanging Coal for Energy Use or to Produce Electricity

3. The aspects of consideration when choosing 임팩트 크러셔 해머 into consideration are as follows:

3.1 Material Hardness

Choice of hammers depends on the type of material to be crushed. Commodities that have higher stiffness require wear-resistant types of material.

3.2 Impact Load

You should also consider the force of impact during crushing. Load high applications impact type needs to have tougher materials such as manganese steel.

3.3 비용 효율성

Compare the cost with performance. The high chromium hammers might be more expensive but you find they will last longer severing the initial costs.

4. Recommendations on Hammer Working of A Crusher

4.1 정기점검

Three is a need to examine hammers on periodic basis for such features as wear, presence of cracks or mis-alignment of hammers to avoid cases of hammer failure.

4.2 올바른 설치

The hammers should be tightly fixed to the equipment to prevent vibrations or high unevenness.

4.3 Rotation and Replacement

Remember, it’s best to reorient the hammers from time to time, apply in rotation and change as soon as the wear ratio reaches maximum.

4.4 윤활

Oil the mechanical systems as often as possible in order to avoid wear out and over heating.